Carel SPKT00G1S0 – 0…60bar – 7/16″ – pressure transducer 0-5V
kr.1.696,00
Price is excl. TAX.
Danish krone
In stock
Carel SPKT00G1S0 – 0…60bar – 7/16″ – pressure transducer 0-5V
| Electrical information | |
| Power supply: | (protected against polarity reversal) 5 Vdc ±10% |
| Power supply: | overvoltage 24 Vdc |
| Current draw: | max 8 mA |
| Output voltage: | 0.5-4.5 Vdc ratiometric |
| Short-circuit protection: | yes |
| Output load: | >5 k? |
| Response time: | <5 ms, 0~99% FS |
| Insulation resistance: | > 10 MO @ 500 VDC |
| Electrical connector: | Male, 3-pin Metri-Pack 150 |
| Cable: | See SPKC****** accessory |
| Performance information | |
| Operating temperature: | -40T135°C |
| Fluid temperature: | -40T135°C |
| Storage temperature: | -40T125°C |
| Ingress protection: | IP55 or IP67 depending on the connector plugged in. For more details, see SPKC****** accessory table. |
| Total error band (including linearity, hysteresis, repeatability, calibration error) relative to all operating temperature and humidity values: | ±1% FS at 5 Vdc (0T50°C) |
| ±2% FS at 5 Vdc (0T80°C) | |
| ±4% FS at 5 Vdc (-40T125°C) | |
| Life cycle: | > 10 million cycles, 0-100% FS at 25°C |
| Physical information | |
| Vibrations IEC 60068-2-64: | 5-2000 Hz / 10 g – in direction x – y – z |
| Shock IEC 60068-2-27: | 20 g sinusoidal, 11 ms |
| Drop from any axis: | 1.0 m (falling from 1 metre high) |
| Material in contact with refrigerant: | AISI 316L stainless steel |
| Housing: | AISI 316L stainless steel |
| Tightening torque: | 12 to 16 Nm |
| Mechanical connection: | Female, 7/16”-20UNF – 45° flare |
| Pressure range | From 4.2 barg to 90 barg |
| Over pressure: | 2.5 times pressure range, see table |
| Burst pressure: | 300 bar |
| Refrigerant compatibility: | All refrigerants compatible with AISI 316L stainless steel |
| Vacuum pressure (referred to refrigerant circuit): | not available |
| Weight: | 55g (net weight) |
