Carel SPKT00L1S0 – 0…90bar – 7/16″ – pressure transducer 0-5V


Price is excl. TAX.

In stock (can be backordered)

Carel SPKT00L1S0 – 0…90bar – 7/16″ – pressure transducer 0-5V female

Electrical information
Power supply: (protected against polarity reversal) 5 Vdc ±10%
Power supply: overvoltage 24 Vdc
Current draw: max 8 mA
Output voltage: 0.5-4.5 Vdc ratiometric
Short-circuit protection: yes
Output load: >5 k?
Response time: <5 ms, 0~99% FS
Insulation resistance: > 10 MO @ 500 VDC
Electrical connector: Male, 3-pin Metri-Pack 150
Cable: See SPKC****** accessory
Performance information
Operating temperature: -40T135°C
Fluid temperature: -40T135°C
Storage temperature: -40T125°C
Ingress protection: IP55 or IP67 depending on the connector plugged in. For more details, see SPKC****** accessory table.
Total error band (including linearity, hysteresis, repeatability, calibration error) relative to all operating temperature and humidity values: ±1% FS at 5 Vdc (0T50°C)
±2% FS at 5 Vdc (0T80°C)
±4% FS at 5 Vdc (-40T125°C)
Life cycle: > 10 million cycles, 0-100% FS at 25°C
Physical information
Vibrations IEC 60068-2-64: 5-2000 Hz / 10 g – in direction x – y – z
Shock IEC 60068-2-27: 20 g sinusoidal, 11 ms
Drop from any axis: 1.0 m (falling from 1 metre high)
Material in contact with refrigerant: AISI 316L stainless steel
Housing: AISI 316L stainless steel
Tightening torque: 12 to 16 Nm
Mechanical connection: Female, 7/16”-20UNF – 45° flare
Pressure range From 4.2 barg to 90 barg
Over pressure: 2.5 times pressure range, see table
Burst pressure: 300 bar
Refrigerant compatibility: All refrigerants compatible with AISI 316L stainless steel
Vacuum pressure (referred to refrigerant circuit): not available
Weight: 55g (net weight)