Please read the manual carefully if used in ATEX applications.
| Electrical | |
| Power supply (protected against polarity reversal) | 5 Vdc ±10% |
| Power supply overvoltage | 18Vdc |
| Maximum reverse voltage | 11Vdc |
| Current draw | 5 mA typical |
| Output voltage | 0.5-4.5 Vdc ratiometric |
| Short-circuit protection | yes |
| Output load | >47 kΩ |
| Response time | 10 ms max |
| Insulation resistance | 1 GΩ @ 50 Vdc |
| Electrical connector | Male, 3-pin Metri-Pack 150 |
| Electrical connector insulation material | PBT 30GF |
| Electrical contact material and surface finish material | Cu Zn20, Ni 2-3μm Sn 5 ± 2.5 μm |
| Cable | See SPKC****** accessory |
Carel SPKT00E3P0 Pressure transducer 0-5V ratiometric, -1…12,8 Barg
kr.670,87
Price is excl. TAX.
Danish krone
In stock
| Model | SPKT00E3P | ||
| Pressure (PSI) | -15 to 185 | PSI | 0.5 – 4.5V |
| Pressure (bar) | -1 to 12.8 | Bar | 0.5 – 4.5V |
| Pressure (kPa) | -100 to 1280 | kPa | 0.5 – 4.5V |
| Over pressure | 38 | Bar | |
| Burst pressure | 110 | Bar | |
